Molded Fiber For Cosmetic Packaging Gift Box

Two-tier gift box platforms for cosmetics

A rigid gift box on its own gives you one flat layer of product and a lot of empty air. Brands usually fill that air with shredded paper, which settles in transit and arrives looking like packaging filler rather than a presentation.

We mould a fibre platform that sits at a fixed height inside the box, creating two usable layers and a defined product stage:

• Raised platforms with a formed shoulder that rests on the box wall, so the height is repeatable unit to unit.
• Product-facing cavities in the top surface, holding the hero item up where the lid reveals it first.
• Under-platform space for the leaflet, refill, spatula or sample sachet that would otherwise float loose.
• Ribbon and lift notches pressed into the edge so the platform can be lifted out without tearing.

Wet-pressed fibre takes a fine mould texture, so the platform can carry a debossed brand mark or a linen-like surface without a separate finishing step. It also accepts hot-stamped foil directly on the pressed face.

MOQ 10,000 pieces per design; tooling 7–15 days, production 15–25 days after sample approval. This is a part that has to be designed against the box, so send the box internal height as well as the product dimensions - or send us a sample box and we will work from the physical part.