Molded Fiber Packaging

Toy packaging that survives play and shelf life — molded fiber trays with rounded edges, no splinters, and room for every small part.

Molded pulp earphone trays that hold several models in one layout, so a mixed carton does not need mixed packaging.

A molded fiber clamshell box with an interlocking snap-fit lid — one piece, no glue, and a visible seal once it has been opened.

A double-layer foldable molded fiber insert: two product levels in one moulded piece, so a set ships as a single unit.

Molded fiber insert trays developed around cream jars, with the rim height set so the lid closes without pressing on the product.

Thermoformed molded fiber — also called wet-press or press-dried — gives a smooth, dense surface and a tight dimensional tolerance.

Molded fiber clamshell boxes for phone cases, chargers and power banks, sized to the accessory so nothing rattles on the way to the customer.

Moulded paper pulp is water, cellulose fibre and a screened tool pressed into shape — the material behind every tray in this range.

Razor packaging is a retail problem in disguise: handle, cartridges and travel case each need their own molded pulp pocket.

Low-mass, high-value audio packaging: molded fiber inserts that pin earbuds, headphones and charging cases in place inside the retail carton.

Electronics packaging fails in two predictable places: an insert too loose to hold, or too tight to release. Both are set by tooling tolerance.

Moulded fiber trays for bottles and stemware: shoulder-seated cavities that keep the glass off the tray floor in transit.